VetterLand https://vetterland.com/ Guns, Gear & 'Murica! Wed, 23 Dec 2020 09:38:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.3 https://i1.wp.com/vetterland.com/wp-content/uploads/2019/01/cropped-VetterLand-Favicon-2.png?fit=32%2C32&ssl=1 VetterLand https://vetterland.com/ 32 32 157212695 MTM 9mm Ammo Box Review https://vetterland.com/mtm-9mm-ammo-box-review/?utm_source=rss&utm_medium=rss&utm_campaign=mtm-9mm-ammo-box-review https://vetterland.com/mtm-9mm-ammo-box-review/#respond Tue, 04 Jun 2019 09:01:27 +0000 https://vetterland.com/?p=6856 The post MTM 9mm Ammo Box Review appeared first on VetterLand.

]]>

Price: $1.99/Box

A Look at the MTM 9mm Ammo Box:

The MTM Ammo Box is one of the best storage solutions for your 9mm ammo. Whether you reload, purchase loose ammo, or simply want a more compact storage solution, the MTM 9mm Ammo Box is the way to go.

So why did I purchase twenty MTM 9mm Ammo Boxes? Well, not too long ago I purchased 1000 rounds of 9mm Blazer ammo. Although Blazer ammo is great, the fifty round boxes they ship in are not so great due to their unnecessarily large size. For reference take a look at the image below.

MTM 9mm Ammo Box

When it comes to storing ammo I’m partial to ammo cans, and since every inch of space matters it’s important to have boxes that’re ergonomic and space efficient. While Blazer boxes are cumbersome for long term storage, I found the MTM 9mm boxes to be an ideal solution. Let’s get into the specific reasons why I like these boxes so much.

Compact:

In theory cardboard boxes should be smaller and more compact than polymer boxes. Be that as it may, this isn’t the case when you compare the MTM 9mm ammo box to most 9mm ammo manufacturer boxes. Because the MTM box is so compact it’s perfect for storing in your ammo can or taking on-the-go in your range bag.

MTM 9mm Ammo Box

Durable/Reusable:

You can add the crush resistant polymer construction to the list of reason why the MTM ammo box is an upgrade over ammo manufacturer boxes. Since cardboard is susceptible to being crushed it’s nice to have some reassurance that the MTM ammo box will actually protect your ammo. Because these boxes are so durable you’ll have them and reuse them for a lifetime, unless of course you’re running them over with your truck or something.    

MTM 9mm Ammo Box

Stackable:

When stacked cardboard tends to slip and slide, but not these MTM ammo boxes. They’re ergonomically designed with feet on the bottom that interlock with the tops when stacked on each other. These boxes have saved me from the unorganized mess that I’ve experienced after moving my ammo can around in the past. Although it’s a small detail I’ve really come to appreciate the stackability of these boxes.

MTM 9mm Ammo Box

Inexpensive:

I’d have to say that at $2 per box these things are a tremendous bargain. They provide me with so much value that it’s a no brainer whether or not I’d purchase them again. I bought twenty MTM 9mm boxes to accommodate the 1000 rounds of blazer ammo that I purchased, and the amount of space that I reclaimed in my ammo can was incredible. If you’re looking for an inexpensive way to save space or protect your ammo, the MTM 9mm ammo box is a perfect solution.

Additional Noteworthy Perks:

  1. Made in the USA
  2. Labels Included with each box
  3. Transparent Lid
  4. Snap Lock Latch 25 Year Guarantee
  5. Removable Lid (Nests together with bottom portion of the ammo box)

Final Thoughts:

If you’re in search of a compact way to organize and store your 9mm ammo, then I highly recommend the MTM 9mm Ammo box. If someone told me about these boxes when I began my search it would’ve saved me a lot of time. These boxes aren’t JUST the best value for the price, they’re actually among the best options for 9mm ammo storage in general. Drop by the comments below and let us know what storage solutions you use for your 9mm ammo.

Mr. Vetter, OUT!

The post MTM 9mm Ammo Box Review appeared first on VetterLand.

]]>
https://vetterland.com/mtm-9mm-ammo-box-review/feed/ 0 6856
Caldwell Ammo Box (223, 556, 204) Review https://vetterland.com/caldwell-ammo-box/?utm_source=rss&utm_medium=rss&utm_campaign=caldwell-ammo-box https://vetterland.com/caldwell-ammo-box/#respond Fri, 22 Mar 2019 07:49:00 +0000 https://vetterland.com/?p=6776 The post Caldwell Ammo Box <br> (223, 556, 204) Review appeared first on VetterLand.

]]>

Price: $10.99

After purchasing 1000 rounds of loose XM855 ammo I went on the hunt for an organized way to store it. The Caldwell Ammo Box is among the best solutions that I found for storing rifle ammo including: 223, 556, and 204.

So, why is the Caldwell Ammo Box an awesome storage solutions for your rifle ammo? Let’s get into it.

Portability:

To start, Caldwell Ammo Boxes contain slots that are tightly indexed. As a result you’re able to store 50 rounds in each box efficiently.

Because Caldwell Ammo Boxes are so compact, they’re perfect for long-term storage and/or trips to the range. In addition, these ammo boxes feature removable lids that unhinge and nests with the bottom cavity. You’ll find this particularly useful when you’re storing empty ammo boxes after a trip to the range.

Durability:

Since ammo is typically packed in cardboard, it’s susceptible to harsh conditions and the possibility of being crushed. On the contrary, Caldwell Ammo Boxes are constructed with a high density polymer, so they’re extremely tough and provide great protection. Whether you’re traveling or storing ammo, you can rest assured knowing that your ammo is well-protected.

Stackability:

If you own an ammo can then you know the feeling of playing Tetris with your ammo, right? Well, the Caldwell Ammo Box makes stacking ammo a breeze. There are feet on the bottom of the ammo boxes that engage with grooves on the lid. This allows the ammo boxes to interlock, which prevents them from sliding around your ammo can the way cardboard tends to.

Transparency: 

Not only are the lids ergonomically designed to stack, but they’re also transparent. This transparency allows you to quickly gauge how much ammo you have left in your box, which you’ll find really useful.

In a pinch, this could save you some precious time.

Dimensions & Weight:

Dry Weight: 3.5 oz

Full Weight: 1lb 8.7oz (50 rounds of XM855)

Price:

Caldwell Ammo Boxes are sold as a five pack on Amazon for $10.99. You’re paying about $2.20/box, which is a great deal for what you’re getting. Considering you’re purchasing boxes that will last a lifetime (unless you’re really abusing them), I don’t think you can go wrong here.

Compatibility:

Although I don’t own the Caldwell AR Mag Charger, it’s worth mentioning that these boxes are designed to work seamlessly with their mag loader. If you own a Caldwell AR Mag Charger, please feel free to comment below sharing your thoughts on it.

Conclusion:

For those that are in search of a compact yet durable box for your rifle ammo, Caldwell Ammo Boxes are the perfect solution. If asked by a friend, I would 100% recommend these to them. If you guys purchase or own these  ammo boxes already, please feel free to comment below telling us your thoughts on these ammo boxes! The community would love to hear from you, and I would too.

Until next time,

Mr. Vetter, OUT.   

The post Caldwell Ammo Box <br> (223, 556, 204) Review appeared first on VetterLand.

]]>
https://vetterland.com/caldwell-ammo-box/feed/ 0 6776
Magpul Moe Plus Grip Review https://vetterland.com/magpul-moe-plus-grip-review/?utm_source=rss&utm_medium=rss&utm_campaign=magpul-moe-plus-grip-review https://vetterland.com/magpul-moe-plus-grip-review/#respond Wed, 16 Jan 2019 10:07:38 +0000 http://vetterland.com/?p=6120 The post Magpul Moe Plus Grip Review appeared first on VetterLand.

]]>

Price: $22.75 (Brownells)

At a Glance:

The Magpul Moe+ Pistol Grip is an excellent alternative to OEM grips. The Moe Plus is made with polymer and wrapped with a rubber overmold, which provides an amazingly grippy surface. This Magpul pistol grip also features a beaver tail for further enhanced ergonomics. This grip will drastically improve your ability to retain positive control of your rifle, regardless of your environ environment. The MOE + pistol grip also accepts Optional Storage Cores for custom gear stowage.

Pros:

  • Better Gripping Texture than Standard AR Grips (Rubber Overmolded)
  • Available in a Variety of Different Colors
  • Compatible with Magpul Storage Cores
  • Reasonably Priced
  • Made in the USA

Cons:

None

Final Thoughts:

Pistol grips are a basic, yet crucial element of any rifle build. With that being said, the Magpul MOE + is an ergonomic option with lots to love. It has amazing grip, a storage core, it’s very durable, and it’s offered in a variety of colors. I have these grips on several rifles, and I’d highly recommend them. Grab yours HERE.

The post Magpul Moe Plus Grip Review appeared first on VetterLand.

]]>
https://vetterland.com/magpul-moe-plus-grip-review/feed/ 0 6120
Seekins Precision Ambi Safety Review https://vetterland.com/seekins-precision-ambi-safety-review/?utm_source=rss&utm_medium=rss&utm_campaign=seekins-precision-ambi-safety-review https://vetterland.com/seekins-precision-ambi-safety-review/#comments Wed, 16 Jan 2019 10:03:52 +0000 http://vetterland.com/?p=6115 The post Seekins Precision Ambi Safety Review appeared first on VetterLand.

]]>

Price: $34.19 (Brownells)

At a Glance:

The Seekins Precision Ambi Safety Selector is a big-time upgrade over traditional single side levers. Seekins ambi safety allows you to manipulate your AR from both sides without ever adjusting your grip. Due to the improved ergonomics provided by Seekins, you’ll be able to run your AR more efficiently. I appreciate that Seekins designed this safety to install with either a 90 degree throw or a 60 degree throw. Personally, I’m partial to the 60 degree throw because it allows me to fully manipulate the lever while my hands remain in a shoot-ready position. This ambi lever is top-notch, and useful for both left and right hand shooters. It’s a drop in part, so no modifications are needed. You can take pride in knowing that this part is made right here in the good ol’ US of A.

Pros:

  • Fully Ambidextrious
  • 60 or 90 degree configuration
  • Easy drop in replacement
  • Reasonably Priced
  • Multiple Colors
  • Made in The USA

Cons:

None

Final Thoughts:

The Seekins Precision Ambi lever is a functional upgrade that’ll allow you to run your AR more efficiently. This upgrade is handy for lefty shooters and useful for people that train with their strong and ‘weak’ hand. This ambi lever creates efficiency by allowing you to switch the safety on and off without adjusting your grip. Overall, this part is reasonably priced, easy to install, and adds ergonomics to your AR. We highly recommend this part for your AR-15. Buy one HERE.

The post Seekins Precision Ambi Safety Review appeared first on VetterLand.

]]>
https://vetterland.com/seekins-precision-ambi-safety-review/feed/ 1 6115
Odin Works XMR 2 (Extended Mag Release) Review https://vetterland.com/odin-works-xmr-2-extended-mag-release-review/?utm_source=rss&utm_medium=rss&utm_campaign=odin-works-xmr-2-extended-mag-release-review https://vetterland.com/odin-works-xmr-2-extended-mag-release-review/#respond Wed, 16 Jan 2019 09:57:58 +0000 http://vetterland.com/?p=6111 The post Odin Works XMR 2 (Extended Mag Release) Review appeared first on VetterLand.

]]>

Price: $20.90 (Brownells)

At a Glance:

If you like upgrades that make your AR more ergonomic and efficient, then you’ll certainly like the Odin Works Extended Mag Release (XMR 2). The XMR 2 is machined from billet 6061 aluminum and sports stylish boomerang cuts that trim weight. This extended mag release will improve the ergonomics of your rifle by allowing you to release the magazine without adjusting your grip. Odin Works XMR 2 is an ideal solution for shooters with small hands and fingers, because the extension allows you to place your index finger and drop the mag with ease. Incase you’re wondering, this part IS compatible with BAD levers and Phase 5’s Bolt Release. The Odin Works Mag Release is a drop in part, and can be installed within a matter of minutes. You’ll also be happy to know that this part ships in a variety of colors, and is proudly made in the USA.

Pros:

  • Install in minutes
  • Fair Price
  • Available in Multiple Colors
  • Machined from 6061 Aluminum
  • Works w/ BAD Lever (and Phase 5 Bolt Release)
  • Compatible w/ AR-15 and AR-10
  • Made in the USA

Cons:

None

Final Thoughts:

If you or a family member have small hands or fingers the XMR 2 is a big-time upgrade for your AR-15. This part will allow you to drop your magazines faster so you can get back in the fight quicker. The Odin Works XMR 2 is reasonably price, and very easy to install. They also ship in a variety of colors. Pick up the Odin Works XMR 2 now, and you won’t be disappointed.

The post Odin Works XMR 2 (Extended Mag Release) Review appeared first on VetterLand.

]]>
https://vetterland.com/odin-works-xmr-2-extended-mag-release-review/feed/ 0 6111
Magpul Daka Everyday Wallet Review https://vetterland.com/magpul-daka-everyday-wallet-review/?utm_source=rss&utm_medium=rss&utm_campaign=magpul-daka-everyday-wallet-review https://vetterland.com/magpul-daka-everyday-wallet-review/#respond Wed, 16 Jan 2019 09:53:30 +0000 http://vetterland.com/?p=6107 The post Magpul Daka Everyday Wallet Review appeared first on VetterLand.

]]>

Price: $24.95 (Amazon)

At a Glance:

Magpul’s Daka Everyday Wallet is a refreshing alternative to traditional bulky wallets. This wallet has a slim and sleek profile that’s complimented with a reinforced polymer construction. The polymer material makes the this wallet very strong, durable, and chemical resistant, which is ideal for an item that’ll be riding in your pocket for years to come. The Daka Everyday is a minimalist wallet to its core, but it’s also extremely functional. The wallet features a windowed ID pocket, a center pocket for bills and notes, and slots that will accommodate 3-7 cards comfortably. One of the best parts about the Daka Everyday Wallet is that it’s made right here in the US of A!

Pros:

  • Very slim
  • Strong/durable/chemical resistant
  • Aesthetically pleasing
  • Windowed ID pocket
  • Center pocket for bills and notes
  • Fits 3-7 cards comfortably
-Made in the USA

Cons:

None

Final Thoughts:

For such a small package Magpul’s Daka Everyday Wallet is packed with features. In my opinion, it was thoughtfully designed and very well made. Coming in at $25 I’d have to say the price is right too. Whether you’re a life-long minimalist or someone who’s tired of bulky wallets, the Daka Everyday is an excellent choice. Magpul really knocked it out of the park with this one.

The post Magpul Daka Everyday Wallet Review appeared first on VetterLand.

]]>
https://vetterland.com/magpul-daka-everyday-wallet-review/feed/ 0 6107
Ameriglo Glock 42/43 Night Sights Review https://vetterland.com/ameriglo-glock-42-43-night-sights-review/?utm_source=rss&utm_medium=rss&utm_campaign=ameriglo-glock-42-43-night-sights-review https://vetterland.com/ameriglo-glock-42-43-night-sights-review/#respond Wed, 16 Jan 2019 09:49:28 +0000 http://vetterland.com/?p=6103 The post Ameriglo Glock 42/43 Night Sights Review appeared first on VetterLand.

]]>

Price: $82.50 (Amazon)

At a Glance:

Most Glock owners agree that one of the single best upgrades for any Glock are the sights. Well, Ameriglo’s night sights have proven to be a tremendous upgrade for my Glock 43. When shooting in no/low light situations, night sights are a MUST. Ameriglo’s night sights will help you place rounds on target much faster with your Glock 42/43, which could potentially save your life in a hostile situation. These sights are made with high quality Swiss-made tritium vials in the rear and front sights, which also feature white rings around them for quick target acquisition during the day time. These sights are priced under $90, which is significantly cheaper than Trijicon’s sights. In my opinion, Ameriglo has proven to be synonymous with high quality night sights that are budget friendly.

Pros:

  • Get on Target in No/Low Light situations
  • Quicker Target acquisition during the day time
  • 3 Dot Night Sight Set
  • High quality Swiss-made tritium vials
  • Budget friendly
  • Made in the USA

Cons:

None

Final Thoughts:

Night sights are a must have for your EDC pistol. Fortunately Ameriglo’s night sights are very high quality and not too pricey. The tritium vials shines bright, they’re machined from U.S. Steel, and they’re also assembled here in the U.S.A. Grab a pair of Ameriglo Night Sights and give your Glock 42/43 a big time upgrade.

The post Ameriglo Glock 42/43 Night Sights Review appeared first on VetterLand.

]]>
https://vetterland.com/ameriglo-glock-42-43-night-sights-review/feed/ 0 6103
Magpul Moe K2 Grip Review https://vetterland.com/magpul-moe-k2-grip-review/?utm_source=rss&utm_medium=rss&utm_campaign=magpul-moe-k2-grip-review https://vetterland.com/magpul-moe-k2-grip-review/#respond Wed, 16 Jan 2019 09:42:34 +0000 http://vetterland.com/?p=6099 The post Magpul Moe K2 Grip Review appeared first on VetterLand.

]]>

Price: $19.90 (Brownells)

At a Glance:

The Magpul MOE K2 grip is a great upgrade for your AR platform rifle. This grip significantly improves the ergonomics of short Length of Pull (LOP) weapons, such as AR Short Barrel Rifles and AR Pistols. What makes the K2 grip more ergonomic than the traditional A2 style grips is the difference in angle. The K2 grip also features an aggressive texture that provides positive weapon control. This grip is very easy to install and requires zero gunsmithing. This grip is compatible with Magpul Core accessories such as the CR123A battery core, and the AA/AAA battery core.

Pros:

  • Easy to Install
  • Compatible with Most Lower Receivers
  • Compatible with Magpul Core Accessories
  • Improve Ergonomics/Grip of your Rifle
  • Made in The USA

Cons:

None

Final Thoughts:

The MOE K2 grip is a very inexpensive, yet very useful upgrade for your sub 16” AR. This grip is easy to install and the improved ergonomics can be felt immediately. With the K2 grip your next trip to the range will be thrilling, and you should see positive results. There are few upgrades out there under $20 that will improve the feel of your build as much as the MOE K2. Grab one HERE.

The post Magpul Moe K2 Grip Review appeared first on VetterLand.

]]>
https://vetterland.com/magpul-moe-k2-grip-review/feed/ 0 6099
Magpul MOE Trigger Guard Review https://vetterland.com/magpul-moe-trigger-guard-review/?utm_source=rss&utm_medium=rss&utm_campaign=magpul-moe-trigger-guard-review https://vetterland.com/magpul-moe-trigger-guard-review/#respond Wed, 16 Jan 2019 06:58:34 +0000 http://vetterland.com/?p=6093 The post Magpul MOE Trigger Guard Review appeared first on VetterLand.

]]>

Price: $8.50 (Brownells)

At a Glance:

Magpul’s MOE trigger guard is another inexpensive and ergonomic upgrade for your AR. This trigger guard features a shallow “V” shape that allows you to wear heavy/thick gloves during cold weather or tactical operation. Even if you’re not wearing gloves, it’s nice to have some extra room when you’re sliding your index finger inside of the trigger guard. Since it’s constructed with polymer this trigger guard is very lightweight. This part is easy to install on your AR and can be done in a matter minutes. Like most Magpul products this part is high quality and proudly made in the US of A.

Pros:

  • Allows Shooter to Wear Gloves While operating AR
  • Easy Installation
  • Ergonomic Upgrade
  • Great Cost/Value Ratio
  • Made from Lightweight Polymer
  • No Modifications Needed
  • Made in the USA

Cons:

None

Final Thoughts:

Overall, the Magpul MOE Trigger Guard is inexpensive, ergonomic, easy to install, durable, and light weight. Whether you plan on operating your AR with gloves or not, the additional room provided by the MOE Trigger Guard is amazing. For less than $9.00 it’s definitely a part worth upgrading. This is one of the only parts on your AR that cost less than $10.00, and will immediately improve the ergonomics of your build.

The post Magpul MOE Trigger Guard Review appeared first on VetterLand.

]]>
https://vetterland.com/magpul-moe-trigger-guard-review/feed/ 0 6093
Springfield Armory XD Gear Magazine Loader https://vetterland.com/springfield-armory-xd-gear-magazine-loader/?utm_source=rss&utm_medium=rss&utm_campaign=springfield-armory-xd-gear-magazine-loader https://vetterland.com/springfield-armory-xd-gear-magazine-loader/#respond Mon, 07 Jan 2019 09:09:01 +0000 http://vetterland.com/?p=6067 The post Springfield Armory XD Gear Magazine Loader appeared first on VetterLand.

]]>

Price: $19.70 (Amazon)

At a Glance:

Springfield Armory’s XD Gear Mag Loader is useful, however limited. Let’s start with the upsides of the Springfield Mag Loader. First, it’ll reduce your reload times, which is especially useful on range days. Second, your fingertips will thank you for avoiding the stress that comes with reloading magazines by hand. Third, this mag loader is compatible with most Springfield Pistol magazines including: 9mm, .357 Sig, .40 S&W, and .45 GAP.

So, what’s the downside? While the Springfield Armory Mag Loader works great for loading their magazines, it falls short due to its inability to work with other magazines. The Springfield mag loader comes with a lot of their pistols, but it’s also available for purchase as a stand-alone item.

In my opinion, if you’re interested in purchasing Springfield’s Magazine Loader, then you’re better off spending an extra fifteen dollars for the Maglula UpLULA. The UpLULA is a universal mag loader, and it’s especially useful when loading various pistols and calibers at home or at the range.

Pros:

  • Made from a heavy duty polymer
  • Multi-Caliber Speed Loader
  • Very ergonomic finger grip on speed loader for faster magazine loading

Cons:

  • Exclusive to Springfield Armory pistols.

Final Thoughts:

Although the Springfield Armory Mag Loader works great with their pistols, it lacks the versatility of working with others. If you’re interested in a mag loader strictly for your Springfield, then this is a great option. On the other hand, if you don’t mind spending an additional fifteen dollars for a universal pistol mag loader, then the Maglula UpLULA is an even better option. Check out the blog that we did on the Maglula UpLULA

The post Springfield Armory XD Gear Magazine Loader appeared first on VetterLand.

]]>
https://vetterland.com/springfield-armory-xd-gear-magazine-loader/feed/ 0 6067